Lewalltec silicate

Question

Mineral coating for façade protection and decoration. Exterior


Mineral coating for façade protection and decoration. Excellent cohesion between the paint and the surface.

 

Characteristics:

 

Finish Matt
Performance 7-11 m2/l/coat
Drying 30-40 MINUTES
Repainting 6-7 hours
Dilution SILICA-PRIMER and water, 1:1
1st coat 10-20%. 2nd coat 5-10%
Application Brush. Roller
Cleaning Water
Containers 750 ml 4 L 15 L

 

LEWALLTEC SILICATE Colors Chart.


Do not apply with temperatures below 5-6 ° C. Support for paint should be clean of dust, grease, oil and paint residues shabby ... On surfaces in poor condition clean and remove previous layers and use our primerSILICA-PRIMER (diluted 1: 1 with water).

· There shall be applied on plastic paint, tempera, alkyd enamels, etc ...
· Not compatible mixing with any type of paint.
· To apply on plaster must always be primed with SILICA-PRIMER (diluted 1: 1 with water).

· It should be noted that different application and drying conditions can lead to variations in the final color, so you should pay special attention to dark colors and take special care with the joints and rework. Try not to apply when the sun directly on the support.
· Mix well before application.

Opinions