Lequapox sealer 2C
Primer produced from a polyamide hardener and an epoxy aqueous emulsion resin. It gives a great penetrability, favoring the subsequent anchoring of any kind of finishing painting, especially Lequapox of Lepanto. For the best results of this product, substrate moisture content must be less than 8% and should not be applied at temperatures below 7 o C. We recommend consult data sheet.
Formats: 3 Liters (2 ,25+0,75) - 16 Liters (12+4)
PAINTINGS FOR SOIL APPLICATION. IMPORTANT
For a proper finishing of floor paints, please pay special attention to the instructions in the datasheets. Special attention to the information on surface preparation and environmental conditions necessary for its application.
For optimum performance of this product, substrate moisture content must be less than 8% and should not be applied at temperatures below 7 ° C. It is recommended to consult the data sheet.
Performance by layer: 7-11 m²/liter depending on the surface
Repaint: 6-8 hours
Applications: brush, roller, spray gun