Excellent service, fast, personalized and with good customer advice. With a wide variety of paints and enamels.
Jose Ros
Client
Lequapox Water epoxi 2C
Lequapox Water epoxi 2C Floors. Interior
Finishing paint prepared on an adductus of polyamide which requires an epoxy resin to obtain a high hardness film anda high chemical resistance. Especially suitable for floors requiring high mechanical strength and high traffic present. Being a water product, it allows tar application on soils, asphalt and slurry. It also avoids the problems derived of working with solvents in underserved or poorly ventilated areas. For the best results of this product, substrate moisture content must be less than 8% and should not be applied at temperatures below 7 o C. We recommend consult data sheet.
* Paint with the possibility of semi-matte finishing.
* Possibility additive antiskid.
Formats: 3 Liters (2,25+0,75) - 16 Liters (12+4)
PAINTINGS FOR SOIL APPLICATION. IMPORTANT
For a proper finishing of floor paints, please pay special attention to the instructions in the datasheets. Special attention to the information on surface preparation and environmental conditions necessary for its application.
Colors: gray, black (Ral 9010) and oxide red.
Other colors: price available on request
For optimum performance of this product, substrate moisture content must be less than 8% and should not be applied at temperatures below 7 ° C. It is recommended to consult the data sheet.
Glossy finish
Performance by layer: 8/12m²/liter depending on the surface
Drying: 4-6 hours
Repaint: 12 hours
Dilutions: Water
%: 25 - 30 1st layer, 15-25 2nd layer
Applications: brush, roller, spray gun
Cleaning: Water